Before Charging The Bat­ Tery; Battery Recycling; Battery Charger - Panasonic EYFLC1A Operating Instructions Manual

Cordless oilpulse driver
Table of Contents

Advertisement

Available languages

Available languages

• Tightening torque decreases rapidly as
the battery nears the end of its charge.
(The product's automatic power-off func-
tion will engage once the battery's charge
is exhausted.)
N·m
(kgf-cm)
Immediately
after charging
At end of
charge
No. of bolts tightened per charge (Bolts)
4) Other
• Bit and socket condition: Material, amount
of play, etc.
• Use of a universal joint or socket adapter.
• User: Manner in which the tool is applied
to the bolt, strength with which the tool is
held, manner in which the tool's switch is
engaged.
• Condition of object being tightened: Mate-
rial, seating surface finish.
[Battery Pack]
For Appropriate Use of Bat­
tery Pack
Li­ion Battery Pack
• For optimum battery life, store the Li-ion bat-
tery pack following use without charging it.
• When charging the battery pack, confirm
that the terminals on the battery charger
are free of foreign substances such as dust
and water etc. Clean the terminals before
charging the battery pack if any foreign sub-
stances are found on the terminals.
The life of the battery pack terminals may be
affected by foreign substances such as dust
and water etc. during operation.
• When battery pack is not in use, keep it
away from other metal objects like: paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause sparks, burns or a fire.
• When operating the battery pack, make sure
the work place is well ventilated.
• When the battery pack is removed from the
main body of the tool, replace the battery
pack cover immediately in order to prevent
dust or dirt from contaminating the battery
terminals and causing a short circuit.
Battery Pack Life
The rechargeable batteries have a limited life.
If the operation time becomes extremely short
after recharging, replace the battery pack with
a new one.

Battery Recycling

ATTENTION:
A Li-ion battery that is recyclable powers
the product you have purchased.
Please call 1­800­8­BATTERY for infor-
mation on how to recycle this battery.

[Battery Charger]

Charging
Read the operating manual for Panasonic bat-
tery charger for the battery pack before charg-
ing.
Before charging the bat­
tery
Charge the battery at a temperature of 5°C
(41°F) to 40°C (104°F).
The battery pack cannot be charged at a tempe-
rature of less than 5°C (41°F). If the temperature
of the battery pack is less than 5°C (41°F), fi rst
remove the battery pack from the charger and
allow it to sit for an hour in a location where
the temperature is 5°C (41°F) or warmer. Then
charge the battery pack again.
- 10 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents