www.Seagate.com
6. SMART Support
The Nytro XF1230 supports the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting Technology) Command Set.
6.1
SMART Command Set
The Nytro XF1230 supports the SMART Command Set shown in the following table.
Table 14 SMART Attributes
Feature Field Values
D0h
D1h
D2h
D3h
D4h
00h*
01h*
02h*
03h*
04h*
7Fh*
81h*
82h*
83h*
84h*
D5h
D6h
D8h
D9h
DAh
*Low LBA values
6.2
SMART Attributes
The Nytro XF1230 supports the SMART attributes shown in the following table.
Table 15 SMART Attributes
ID
1
Raw Read Error Rate
5
Retired Block count
9
Power on hours
12
Drive Power cycle count
171
Program Fail Count
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. B
SMART READ DATA
SMART READ ATTRIBUTE THRESHOLDS
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
SAVE ATTRIVUTE VALUES
SMART EXECUTE OFF-LINE IMMEDIATE
Execute SMART Off-Line routine
Execute SMART Short Self-test routine (Off-Line)
Execute SMART Extended Self-test routine (Off-Line)
Execute SMART Conveyance self-test routine in off-line mode
Execute SMART Selective self-test routine in off-line mode
Abort Off-Line routine
Execute SMART Short Self-test routine (Captive)
Execute SMART Extended Self-test routine (Captive)
Execute SMART Conveyance self-test routine in captive mode
Execute SMART Selective self-test routine in captive mode
SMART READ LOG
SMART WRITE LOG
SMART ENABLE OPERATIONS
SMART DISABLE OPERATIONS
SMART RETURN STATUS
Attribute ID
Command
Rate of hardware read errors that occurred when reading data from a device
Count of number of blocks that have been reallocated, excluding pending sectors
The time accumulated while the power is on and operating
Count of number of Power Cycles, excluding power mode commands
Number of Error Events on Program
Description
SMART Support
17