Replacing The Usb Board - Acer Aspire 4736G Series Service Manual

3. Align the screw sockets and replace the two
screws.

Replacing the USB Board

1. Insert the USB Board into the casing, ensuring that
the USB Port is accessible through the case.
3. Lock the connector and press down on the FFC
cable to secure it on the casing.
118
4. Secure the Modem cable in place with the
adhesive tape.
2. Run the cable along the casing and insert it into the
FFC connector.
4. Ensure the locating pins is correctly seated and
replace the single securing screw.
Locating Pin
Chapter 3