Replacing The Usb/Led/Power/Card Reader Board - Acer Aspire one Series Service Manual

Replacing the USB/LED/Power/Card Reader Board

IMPORTANT:Before installing the USB board, take care of the following items:
Check that LED isn`t broken
•
SLIDER work smoothly
•
1. Connect the cable to the board.
3. Replace the three or four screws (depending on SKU) to secure the module.
4. Connect the FFC cable to the module and close
the cable latch.
72
2. Turn the board over and place it in the lower case.
HDD SKU
5. Connect the FFC cable to the mainboard and close
the cable latch.
SSD SKU
Chapter 3