Advertisement
6.
MOUNT BLADE BRACKETS TO BLADES
- Take out hardware package.
- Place blade bracket screw through flat
washer, fibre washer and blade.
- Align with corresponding hole in
blade bracket.
- Repeat with (2) remaining screws
and tighten.
Blade Bracket Screw
Flat Washer
Fibre Washer
Blade Bracket
7.
MOUNTING BLADES TO MOTOR
-
Take out
hardware containing motor screws, lock washers and gaskets.
- Place lock washers over motor screws, position motor screws in blade
brackets, place fibre bracket gaskets over screws and secure to motor.
Make sure all screws are tightened securely.
Remove Rubber Stops (optional)
NOTE: Fan comes with three rubber stops (optional on some models)
on motor for shipping purposes only. Remove stops before running motor
or installing blades to motor.
Fig. 8a
Fibre Bracket Gasket
Fig. 9a
Lock Washer
Motor Screw
8
2.
INSTALL MOUNTING BRACKET
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
PERSONAL INJURY, MOUNT TO UL/CSA LISTED OUTLET BOX
MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
- Install J-hook through centre of outlet box and into the wooden joist.
- Secure mounting bracket and rubber gaskets to outlet box.
- Hang the safety cable onto the J-hook.
- Hang fan on temporary hook and install safety cable.
Wood joist
Outlet box
Rubber gasket
Mounting bracket
3.
Motor
Fig. 9b
J-hook
Ceiling
Style#2
Outlet box screws
Fig. 3a
(notprovided)
ELECTRICAL HOOK-UP
- There are several different wiring combinations that can be used in
controlling your ceiling fan to meet your specific requirements.
CAUTION
Green wire - GROUND
Black wire (fan) - POWER
White wire (fan) - COMMON
Red or blue wire (light kit) - POWER
SEE SAFETY PRECAUTIONS ON
PG. #2 BEFORE WIRING
- After making the wire connections, ensure the wires should be spread
apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
- Ensure the splices after being made should be turned upward and
pushed carefully up into the outlet box.
5
Temporary hook
Safety cable
Canopy
Fig. 3b
Advertisement
