Finishing The Indoor Unit Installation; To Fix The User Interface Cover To The Indoor Unit; To Close The Indoor Unit; Configuration - Daikin EHVH04S18CB Installation Manual

5 Configuration

4.6 Finishing the indoor unit
installation
4.6.1 To fix the user interface cover to the
indoor unit
1 Make sure that the front panel is removed from the indoor unit.
See "4.1.1 To open the indoor unit" on
2 Plug the user interface cover into the hinges.
3 Mount the front panel to the indoor unit.
4.6.2

To close the indoor unit

1 Close the switch box cover.
2 Reinstall the top plate.
3 Reinstall the front panel.
NOTICE
When closing the indoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
5 Configuration
5.1

Overview: Configuration

This chapter describes what you have to do and know to configure
the system after it is installed.
NOTICE
The explanation about the configuration in this chapter
gives you ONLY basic explanations. For more detailed
explanation and background information, see the installer
reference guide.
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Quick wizard. When you turn ON the user interface
for the first time (via the indoor unit), a quick wizard starts to help
you configure the system.
▪ Afterwards. If necessary, you can make changes to the
configuration afterwards.
Installation manual
12
Accessing settings – Legend for tables
You can access the installer settings using two different methods.
page 5.
However, NOT all settings are accessible via both methods. If so,
the corresponding table columns in this chapter are set to N/A (not
applicable).
See also:
▪
▪
5.1.1
To access the installer settings
To access the overview settings
To set the user permission level to Installer
To set the user permission level to Advanced end user
Result: The user permission level switches to Adv. end user.
Additional information is displayed and "+" is added to the menu title.
The user permission level will stay in Adv. end user until set
otherwise.
To set the user permission level to End user
Result: The user permission level switches to End user. The user
interface will return to the default home screen.
To modify an overview setting
Example: Modify [1‑01] from 15 to 20.
INFORMATION
When the installer settings are changed, the user interface
will request to confirm. When confirmed, the screen will
shortly turn OFF and "busy" will be displayed for several
seconds.
Method
Accessing settings via the breadcrumb in the
menu structure.
Accessing settings via the code in the
overview settings.
"To access the installer settings" on page 12
"5.3 Menu structure: Overview installer settings" on page 17

To access the most used commands

1 Set the user permission level to Installer.
2 Go to [A]: > Installer settings.
1 Set the user permission level to Installer.
2 Go to [A.8]: > Installer settings > Overview settings.
1 Set the user permission level to Adv. end user.
2 Go to [6.4]: > Information > User permission level.
3 Press for more than 4 seconds.
Result: is displayed on the home pages.
4 If you do NOT press any button for more than 1 hour or press
again for more than 4 seconds, the installer permission level
switches back to End user.
1 Go to the main menu or any of its submenus:
2 Press for more than 4 seconds.
1 Press for more than 4 seconds.
1 Go to [A.8]: > Installer settings > Overview settings.
2 Go to the corresponding screen of the first part of the setting by
using the and button.
INFORMATION
An additional 0-digit is added to the first part of the setting
when you access the codes in the overview settings.
Example: [1‑01]: "1" will result in "01".
EHVH/X04~16S18CB + EHVH/X08~16S26CB
Column in tables
#
Code
.
Daikin Altherma – Low temperature split
4P384971-1C – 2016.02