Playback Your Recordings; Connecting Earphone - Panasonic Palmcorder MultiCam PV-DV702 Operating Instructions Manual

Playback Your Recordings

Playback using the LCD
Monitor
You can also use the LCD monitor to
play back your recording.
1
POWER
180°
90°
90°
2
LCD-OPEN
3
REWIND SEARCH

Connecting Earphone

(not supplied)
PHONE Jack
32
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
4
PLAY
5
STOP
Before you begin
• Connect the Palmcorder to a power
source. (pp. 14, 15)
• Insert a recorded cassette.
1
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
VCR position.
2
Press LCD-OPEN to unlock the LCD
monitor and swing open.
3
Press (REWIND/SEARCH) to
rewind the tape.
4
Press (PLAY) to start playback.
5
Press (STOP) to stop playback.
• When the tape reaches its beginning
during rewind or rewind search, it will
stop automatically.
Note
• When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
• Using the LCD monitor reduces battery
operating time.
• You can place the Palmcorder on a table,
etc. for viewing. Rotate the LCD Monitor
180° and swing it up against the
Palmcorder body as shown.
You can connect earphones (not supplied)
to the PHONE Jack.