Panasonic Palmcorder MultiCam PV-DV702 Operating Instructions Manual page 39

View Recording/Playback on
your TV
[ TV with AUDIO/VIDEO IN Jacks ]
A/V Cable
(Supplied)
To Audio In
[ TV with S-VIDEO IN Jacks ]
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV.
DC Cable
(Supplied)
AV Cable
(Supplied)
To Audio In
S-Video Cable
(Not supplied)
Special Effect Features
A/V OUT
Back of TV
Audio In Video In
To Video In
S-VIDEO
OUT
A/V OUT
Back of TV
Audio In S-Video In
To S-Video In
Before you begin
• When using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal. (p. 15)
1
Set POWER to CAMERA or VCR.
To view what the Palmcorder is
recording or to playback a tape on your
TV.
2
Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
for further information.
3
Start playback or begin a recording.
• Make sure the Palmcorder and TV are
turned off while connecting.
• Please connect the A/V Cable securely.
Note
(Remote Control Only)
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on the remote control.
Press again to remove the indications.
DISPLAY
ON TV
39