Audio Dubbing - Panasonic Palmcorder PV-GS180 Operating Instructions Manual

CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.

Audio dubbing

You can add music or narration to the recorded
cassette.
≥Set to Tape Playback Mode.
1
Insert an external microphone securely into
the [MIC] terminal as far as it will go.
MIC
2
Find a scene that you want to add sound to,
and press the [;] button on the remote
control.
3
Press the [AUDIO DUB] button on the
remote control to make audio dubbing
ready.
4
Press the [;] button on the remote control
to start audio dubbing.
≥Talk into the microphone.
Edit mode
5
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
ª
≥Set to Tape Recording Mode.
≥When you want to preserve the original sound
taken during recording, set [SETUP] >>
[AUDIO REC] >> [12bit] to take pictures. (When
set [16bit], the sounds taken during recording
are erased after recording with audio dubbing.)
≥Set [BASIC] >> [REC SPEED] >> [SP] to take
pictures.
ª
;
You can switch between the sound recorded with
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by
[MIX]: It simultaneously plays back the original
A.DUB ;
ª
≥When pausing the audio dubbing, set the
[12bit AUDIO] on the [SETUP] Sub-Menu to
[ST2] and you can check the pre-recorded
sound.
A.DUB ¥
Press the [;] button on the remote control
to stop audio dubbing.
Before recording with audio dubbing
To play back the sound recorded with
audio dubbing
audio dubbing.
sound and the sound added with audio
dubbing.
To dub audio while listening to a
pre-recorded sound
47
LSQT0973