To Disconnect Usb Cable Safely - Panasonic Palmcorder PV-GS180 Operating Instructions Manual

If a description other than [Microsoft] is
displayed
≥Update the driver with the following procedure.
1
Click [Update Driver...].
2
Check [Install from a list or specific location
(Advanced)] and then click [Next].
3
Check [Don't search. I will choose the driver
to install] and then click [Next].
4
Click [Standard Universal PCI to USB Host
Controller] and then click [Next].
5
Click [Finish].
≥The update of the driver is completed.
Connect the Camcorder.
With a PC
Connecting the Camcorder to a personal
computer
1
Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.
2
Set [BASIC] or [ADVANCE] >>
[USB FUNCTION] >> [DV DATA].
3
Connect the Camcorder to the personal
computer with USB connection cable.
≥When capturing video using the USB
connection, be sure to use Microsoft's Windows
Movie Maker 2.1.
≥You cannot record the video edited by the PC
onto the Tape in the Camcorder.

To disconnect USB cable safely

If USB cable is disconnected while the computer
is on, error dialog box may appear. In such a case
click [OK] and close the dialog box. By following
the steps below you can disconnect the cable
safely.
1
Double click the
≥Hardware disconnect dialog box appears.
2
Select [USB Mass Storage Device] and click
[Stop].
3
Verify [Matshita DVC USB Device] is
selected and click [OK].
≥You can safely disconnect the cable.
icon in task tray.
55
LSQT0973