Table of Contents
Advertisement
First steps
¤
Insert the plastic cover provided for the
headset socket to ensure optimum sound
in speaker mode.
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove – press the centre of
the belt clip firmly with your
right thumb, push the fingernail
of your left index finger up
between the clip and the hous-
ing and pull the clip in an
upward direction.
Placing the handset in the charger
¤
Place the handset in the charger with its display facing forward.
To charge the batteries, leave the handset in the charger.
Please note
Only place the handset in the charger that is intended for it.
10
Advertisement
Table of Contents
