Advertisement
sensitivity is increased to recognize even small movement.
- AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is to be used.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- FILL→SET: Fills in a selected MD area. The COLOUR of filling is sequentially selected as brown, orange,
blue, cyan, yellowish green, yellow and red.
- RETURN: Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
☞ Note
• MD areas show only MOTION DET menu. Therefore, MD areas don't display on the monitor screen.
● PRIVACY: Hide an area you want to hide
on the screen.
When the SPECIAL menu screen is
displayed, press the Up and Down buttons
so that the arrow indicates 'PRIVACY'.
Setup the mode using the 4 direction buttons.
- AREA SEL: You can select up to 8 MD areas.
- AREA MODE:
Determines whether to use the area selected
in the AREA SEL, and the size and position of
the area.
- MASK COLOUR: Determine area COLOUR. You can select
Green, Red, Blue, Black, White.
- TRANSP: Determine the transparency of selected area as
controlling number from 0 to 3.
- RETURN: Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
● DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
● COMM ADJ (Communication Adjustment):
This function sets up the camera communication status when
controlling the camera through an external control device.
When the SPECIAL menu screen is displayed, press the Up and
Down buttons so that the arrow indicates 'COMM ADJ'.
Setup the mode using the 4 direction buttons.
- CAM ID: Determines the camera's identification number (between
23
Gray,
Advertisement
