Related Manuals for SecurView VSXR-601DV
Summary of Contents for SecurView VSXR-601DV
- Page 1 560TVL High Resolution Day/Night Wide Dynamic COLOUR Dome Camera 사용 설명서 MANUAL VSXR-601DV 용 서...
- Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- Page 3 This installation should be made by a qualified service person and should conform to all local codes ■ Warning The camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera if you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused.
- Page 4 ■ Precautions...
-
Page 6: Table Of Contents
■ Contents --------------------------------- 7 1.Features --------------------------------- 8 2. Components & Cable Connection --------------------------------- 9 3. Names and functions of parts --------------------------------- 10 4. Installation & Dimension --------------------------------- 11 5. Setup Menu Operation --------------------------------- 25 6. Troubleshooting --------------------------------- 26 7. Specifications... -
Page 7: Additional Functions
1. Features Horizontal Resolution 560 TV Lines Clear image quality has been achieved by employing a SONY CCD with 410,000 (effective) pixels, which provides a horizontal resolution of 560 TV lines. True DAY & NIGHT This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions. -
Page 8: Components & Cable Connection
2. Components & Cable Connection 1) Components 2) Cable Connection... -
Page 9: Names And Functions Of Parts
3. Names and Functions of Parts 1) Names 2) Functions ① 3AXIS BRACKET - Please loosen screws and fix tilted and panned position. ③ LENS : Vari-Focal Auto Iris Lens ③ OSD PCB SETUP button: Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. -
Page 10: Installation & Dimension
4. Installation & Dimension 1) Installation Dimension... -
Page 11: Setup Menu Operation
5. Setup Menu Operation 1) Menu Structure SETUP MENU 1. LENS • DC • VIDEO • MANUAL 2. EXPOSURE • SHUTTER • AGC • SENS-UP • RETURN • ATW • MANUAL • AWC SET • OUTDOOR 3. WHITE BAL ATW •... - Page 12 ● Manual: Select Manual Lens ② Exposure 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE. 2. Select a desired mode using the Up and Down buttons. ●...
- Page 13 - MANUAL: You can control shutter speed manually. ☞Note • To produce better results with A.FLK, do not use it in conjunction with the WDR mode of the BACKLIGHT menu. • When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light.
-
Page 14: White Balance
③ White Balance Use the White Balance function to adjust the screen COLOUR. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Down buttons so that the arrow indicates ‘White Bal.’ . 2. Select a desired mode using the Up and Down buttons. Select one of the following 5 modes, as appropriate for your purpose. - Page 15 clear sky, or sunset) When the ambient illumination of the subject is dim. If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable. ④ Backlight This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary SV-IV DSP chip.
- Page 16 ● BLC: Enables a user to directly select a desired area from a picture, and to view the area more clearly. 3. Select a desired mode using the Left and Right buttons and press the SET button. • Select WDR to adjust the WDR LIMIT. Select LOW, MIDDLE, or HIGH.
- Page 17 ☞Note • You cannot set the DNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. • When adjusting the noise reduction level of the DNR mode, remember that the higher the level set, the more the noise level will be reduced but that after image may also occur.
- Page 18 ● EXTERN: This mode allows you to apply a desired filter to external signals. ☞ Note • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between COLOUR and Black & White may not occur. •...
- Page 19 ● FREEZE: You can view still or moving pictures. ● V-REV: You can flip the picture vertically on the screen. ● H-REV: You can flip the picture horizontally on the screen. ● D-ZOOM: You can use a digital zoom of x1~x10. ●...
- Page 20 ⑧ Special 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. 2. Select a desired mode using the Up and Down buttons. ● CAM TITLE: If you enter a title, the title will appear on the monitor. If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates ‘CAM TITLE’.
- Page 21 ☞Note • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. Press the SET button. Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET button. Repeat this to enter multiple letters.
- Page 22 SET button. When the position is determined, select ’END’ and press the SET button to return to the SPECIAL menu. ● SYNC: In areas where the supply is at 60Hz, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator.
- Page 23 sensitivity is increased to recognize even small movement. - AREA MODE: Determines whether to use the MD area selected in SENSITIVITY. - SEL POS: Determines which of the 4 vertices of each MD area is to be used. - YPOS: Determines the coordinate of the vertical axis for SEL POS. - XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- Page 24 0 and 255). - BAUD RATE: You can select 2400/4800/9600/19200/38400/57600 bps. - UART MODE: You can select NONE, EVEN or ODD for the parity bits. - RET PKT: Determines whether to send a command back to the controller device when a communication control command is sent to the camera.
-
Page 25: Troubleshooting
Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from Problems Troubleshooting • Please check the power connection. Nothing appears on the screen. • Please check the video signal line connection. •... -
Page 26: Specifications
7. Specifications SIGNAL SYSTEM NTSC TOTAL / EFFECTIVE PIXEL 410K / 380K Pixels 470K / 440K Pixels IMAGE SENSOR Diagonal 6mm (1/3") Sony DS CCD HORIZONTAL RESOLUTION COLOUR : 560 TV Lines↑ B/W : 700 TV Lines↑ MINIMUM ILLUMINATION 0.3Lux(COLOUR), 0.03Lux(BW), 0.00004Lux (Sense-upX256) DAY &... - Page 27 DISTRIBUTED BY...