Advertisement
☞Note
• When the CAM TITLE menu is 'OFF',
no title will be displayed on the monitor screen
even if you enter one.
Press the SET button.
Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET button.
Repeat this to enter multiple letters. You can enter up to 15 letters.
☞Note
• If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a letter, change
the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to be edited,
move the cursor to the letter to be inserted and then press the SET button.
⑤ Enter a title, move the cursor to 'POS' and press the SET button. The entered title appears on the
screen. Select the position to display the title on the screen by using the 4 direction buttons and press the
21
Advertisement
