Advertisement
③ White Balance
Use the White Balance function to adjust the screen COLOUR.
1. When the SETUP menu screen is displayed, select 'White Bal.' by using the Up and Down buttons so that
the arrow indicates 'White Bal.' .
2. Select a desired mode using the Up and Down buttons.
Select one of the following 5 modes, as appropriate for your purpose.
● ATW: Select this when the COLOUR temperature is between 1800°K and 10500°K
● INDOOR: Select this when the COLOUR temperature is between 4500°K and 8500°K.
● OUTDOOR: Select this when the COLOUR temperature is between 1800°K and 10500°K.
(sodium light inclusion)
● AWC → SET: To find the optimal setting for the current luminance environment in this mode, set the
point the camera towards a sheet of white paper and press the SET button.
If the environment changes, readjust it.
● MANUAL: Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or
AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then press the SET
button.
☞ Note
• White Balance may not work properly under the following conditions.
In this case select the AWC mode.
When the COLOUR temperature of environment surrounding the subject is out of the control range (e.g.
14
Advertisement
