Advertisement

Vendor: S000298
ASSEMBLY INSTRUCTIONS
PADDINGTON CABIN BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR PADDINGTON
CABIN BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
This bed is tested to European safety standard BS EN 747
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop
the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.
WARNING: High beds are not suitable for use by children under 6 years of age due to risk of injury from falls .
WARNING: High beds present a serious risk of injury from strangulation if used incorrectly. Never attach or
hang anything on any part of the frame that is not designed to be used with the bed, for example, but not
limited to ropes, strings, cords, hooks, belts and bags.
WARNING: Do not use the high bed if any structural part is missing or broken.
WARNING: Children can become trapped between the bed and adjoining structures including walls, roof
pitches, ceilings and other pieces of furniture. To avoid risk of serious injury, the distance between the top
safety barrier and any adjoining structure shall not exceed 75 mm or shall be more than 230 mm.
CARE & MAINTENANCE:
Assemble in the room of use.
Assemble on a soft, clean surface.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
Use a soft, dry cloth to clean – do not use any detergents or chemicals.
Avoid contact with water and direct sunlight.
www.birlea.com
Page 1 of 11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Paddington Cabin Bed and is the answer not in the manual?

Questions and answers

Summary of Contents for Birlea Paddington Cabin Bed

  • Page 1 Vendor: S000298 ASSEMBLY INSTRUCTIONS PADDINGTON CABIN BED IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR PADDINGTON CABIN BED FRAME. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. HEALTH & SAFETY: DO NOT jump on this bed frame. DO NOT use this bed frame if any parts are missing, damaged or worn.
  • Page 2 Vendor: S000298 Page 2 of 11...
  • Page 3 Vendor: S000298 Parts List Hardware List (found in box 3) Part Description Part Description Left Front End Panel Minifix Left Back End Panel 12 x 15 mm Cam Lock Left Centre End Panel 6.3 x 40 mm Screw Right Front End Panel 6 x 30 mm Wooden Dowel Right Back End Panel 4 x 25 mm CSK Screw...
  • Page 4 Vendor: S000298 Step 1: Insert hardware part D using a small mallet (not provided) DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 2: Insert hardware part J using a small mallet (not provided). Insert hardware part A using a screwdriver (not provided) DO NOT use any power tools as this may damage the frame and will invalidate any claim Page 4 of 11...
  • Page 5: Left Back End Panel (

    Vendor: S000298 Step 3: Join the end panels together as shown using hardware parts A, B and K DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 4: Fix the left back post (22) to the left back end panel (2), and the end support (25) to the left centre end panel (3) using hardware parts A, B and K.
  • Page 6: Lower Back Panel 1

    Vendor: S000298 Step 6: Attach hardware part G to the left doors (27) and right doors (28) using hardware part H and a screwdriver (not provided). Insert hardware part I to the doors using a small mallet (not provided) DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 7: Attach the left division panel (8) and right division panel to the centre shelf panel (15) and centre front plinths (16) using hardware parts C, J and K with a small mallet (not provided) DO NOT use any power tools as this may damage the frame and will invalidate any claim...
  • Page 7: Left Lower Shelf Panel 3

    Vendor: S000298 Step 9: Attach the left lower shelf panel (11) and side front plinth (18) using hardware parts C and K. DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 10: Attach the left upper shelf panel (13) using hardware parts C and K. DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 11: Attach the right lower shelf panel (12) and side front plinth (18) using hardware parts C and K.
  • Page 8: Right Upper Shelf Panel 3

    Vendor: S000298 Step 12: Insert the right shelf division panel (17). DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 13: Attach the right upper shelf panel (14) using hardware parts C and K DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 14: Attach the front base panel (10) using hardware parts C and K.
  • Page 9: Left Front Panel 3

    Vendor: S000298 Step 15: Attach the left front panel (20) and right front panel (21) using hardware parts C and K. DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 16: Attach the assembled left end panel using hardware parts C and K. DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 17: Attach the assembled right end panel using hardware parts C and K.
  • Page 10: Left Back Post (

    Vendor: S000298 Step 18: Secure the right back post (23) and left back post (22) using hardware parts A, B, C and K. DO NOT use any power tools as this may damage the frame and will invalidate any claim Step 19: Secure the support plinths (24) using hardware parts C and K.
  • Page 11: Additional Information

    • If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve any issues with Birlea. • Why don’t you send us photos of your assembled furniture to info@birlea.com...

Table of Contents

Save PDF