Other Features; Set The Alarm Timer; Set The Sleep Timer; Restore Default Settings - Philips FX10 User Manual

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. You
can select disc, radio or USB as alarm source.
1
Make sure that you have set the clock
correctly.
2
Press and hold SLEEP/TIMER for more
than two seconds.
» 'TIMER SET' is displayed. Then, a
prompt to select the sound source is
displayed.
3
Press SOURCE to select a source from
DISC, USB and FM, then press SLEEP/
TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Press / repeatedly to set the hour,
then press SLEEP/TIMER to confirm.
» The minute digits are displayed and
begin to blink.
5
Press / repeatedly to set the minute,
then press SLEEP/TIMER to confirm.
» A prompt to select the volume level is
displayed.
6
Press +/- to select the desired volume
level, then press SLEEP/TIMER to confirm.
» The alarm timer is set and activated.
To deactivate or re-activate an alarm timer
In standby mode, press SLEEP/TIMER
•
repeatedly.
» When the alarm timer is deactivated,
''TIMER OFF is displayed.
» When the alarm timer is re-activated,
'TIMER ON' is displayed.
Tip
•
In BT, AUDIO IN or AUX IN mode, the alarm timer
cannot be set.
•
If the disc or USB source is selected but no audio file
can be played, FM radio is activated automatically.

Set the sleep timer

This unit can switch to standby
automatically after a set period of time.
When the unit is turned on, press SLEEP/
•
TIMER repeatedly to select a set period of
time (in minutes).
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.

Restore default settings

You can also restore the default
settings of the unit.
• In any mode, press and hold
panel for more than five seconds.
» After a while, 'RESET OK' is displayed.
Then, the device reboots automatically.
on the front
EN 17