Contents 8 Listen to radio 1 Important Tune to a radio station Safety Program radio stations automatically Notice Program radio stations manually Select a preset radio station 2 Your Mini Hi-Fi System Introduction 9 Other features What’s in the box Set the alarm timer Overview of the main unit Set the sleep timer...
1 Important h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Safety i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the Know these safety symbols point where they exit from the apparatus.
Contact your dealer if you are not sure about what type of fuse to use. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. Caution: To conform with the EMC and are used by Gibson Innovations Limited directive (2004/108/EC), do not detach the plug from the power cord.
Page 6
Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. Other trademarks and trade names are This symbol on a product means those of their respective owners. that the product is covered by This apparatus includes this label: European Directive 2012/19/EU.
• Main unit Congratulations on your purchase, and • 2 x loudspeakers welcome to Philips! To fully benefit from • Remote control (with battery) the support that Philips offers, register your • Printed materials product at www.philips.com/welcome.
Overview of the main unit c d e f h i j k • Turn on the unit. • Switch to normal standby or • Skip to the previous/next track. Eco Power standby mode. • Tune to a radio station. b AUDIO IN i Disc compartment door •...
q AUX IN (L/R) c PROG • Connect an external audio device • Program tracks. through RCA (red/white) audio cables. • Program radio stations. r ANTENNA (FM) • Connect the supplied FM antenna. • Skip to the previous/next track. • Search within a track/disc/USB.
Page 10
• Start, pause, or resume play. • Confirm selection. q PAIRING • In Bluetooth mode, press and hold for three seconds to enter pairing mode. r SOURCE • Select a sound source: DISC, USB, FM, AUDIO IN, AUX IN or BT.
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The Connect power model number and serial number are on the back of the apparatus.
Open the battery compartment. Insert one AAA battery with correct • During setting, you can press to exit clock setting polarity (+/-) as indicated. without saving the earlier operation. • During setting, if no action is taken within 90 seconds, Close the battery compartment.
‘BT CONNECTED’ (BT connected) scrolls on the screen once. b enable the Bluetooth feature » If you fail to find “Philips FX10‘’ for on your external device. pairing, press and hold PAIRING for three seconds to enter pairing mode.
• To search within a track, press and hold , then release • to resume normal play. If the Bluetooth enabled device also supports AVRCP (Audio Video Remote Control Profile), you can use some basic operation buttons of the unit (such as the play/pause, stop and previous/next buttons) to control Play from USB music play.
5 Listen to an Listen to an external audio external device device with RCA connectors You can listen to an external audio device through the speakers of this unit. Listen to an MP3 player Press SOURCE repeatedly to select the AUX IN source.
6 Play options Display play information • During play, press CLOCK/DISPLAY repeatedly to select different play information. Repeat and shuffle play • During disc play, press repeatedly to select: • REPEAT ONE: the current track is played repeatedly. • REPEAT ALL: all tracks are played repeatedly.
8 Listen to radio Program radio stations manually You can program a maximum of 20 FM preset radio stations. Tune to a radio station Tune to a radio station. Press PROG to activate program mode. Press SOURCE repeatedly to select FM. Press to allocate a number to this Press and hold...
9 Other features • In BT, AUDIO IN or AUX IN mode, the alarm timer cannot be set. • If the disc or USB source is selected but no audio file can be played, FM radio is activated automatically. Set the alarm timer This unit can be used as an alarm clock.
10 Product Bluetooth information Bluetooth® version V2.1 + EDR Frequency band 2.402-2.480 GHzISM Range 10m (free space) Dimensions Note Main Unit (W x H x D) 280 x 118 x 230 mm • Product information is subject to change without prior notice.
After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good • ISO9660, Joliet play quality, clean the disc lens with Philips • Maximum title number: 999 (depending on CD lens cleaner or any commercially file name length) available cleaner.
If the problem remains • Replace or clean the disc. unsolved, go to the Philips web site (www. • Use a finalized CD or correct format disc. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the Cannot display some files in USB device model number and serial number are available.
Page 23
The audio quality is poor after connection with a Bluetooth-enabled device. • The Bluetooth reception is poor. Move the device closer to the unit or remove any obstacle between the device and the unit. Cannot connect with the unit. • The device does not support the profiles required for the unit.
Page 24
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. FX10_12_UM_V2.0...