Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips FX10 User Manual

8 Listen to radio

Tune to a radio station

1
Press SOURCE repeatedly to select FM.
2
Press and hold
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of
20 FM preset radio stations.
In tuner mode, press and hold PROG
•
for more than two seconds to activate
automatic programming.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
16 EN
/ for more than two
Program radio stations
manually
You can program a maximum of
20 FM preset radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
3
Press
radio station, then press PROG to confirm.
4
Repeat the above steps to program other
stations.
Tip
/
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

• In FM mode, press
number.
Tip
•
Position the antennas as far as possible from TV, or
other radiation sources.
•
For optimal reception, fully extend the FM antenna.
/ to allocate a number to this
/ to select a preset