Record Setup - Panasonic HDC-HS250P Operating Instructions Manual

[ALERT SOUND]
Touch screen operation, starting and
stopping of recording and power on/off can
be confirmed with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l 127)
[POWER LCD]
[LCD SET]
[COMPONENT OUT]
[HDMI RESOLUTION]
[VIERA Link]
[TV ASPECT]
[INITIAL SET]
Set to [YES] for changing the menu settings
back to the default condition.
(Settings for [CLOCK SET],
[MEDIA SELECT] and [LANGUAGE] will not
be changed.)
*2
[FORMAT CARD]
*3
[FORMAT HDD]
[CALIBRATION]
[DEMO MODE]
This item is used to start the unit
demonstration.
(Only when the mode is at the
position)
If [DEMO MODE] is switched [ON] when
there is no SD card inserted and while this
unit is connected to the AC adaptor, the
demonstration automatically starts.
(l 35)
If any operation takes place, the
(l 35)
demonstration is canceled. However if no
(l 97)
operations take place for approx. 10
(l 96)
minutes, the demonstration automatically
starts again. To stop the demonstration, set
(l 98)
[DEMO MODE] to [OFF] or insert an SD
(l 95)
card.
[LANGUAGE]
Still Picture Recording Mode
*1 It is not displayed when the Intelligent Auto
Mode is on.
(l 92)
(l 92)

RECORD SETUP

(l 36)
[I.EXPOSURE]
PICTURE
[ASPECT RATIO]
[FLASH LEVEL]
[AF ASSIST LAMP]
≥ For any other menus that are not described
above, refer to menus with the same names for
the Motion Picture Recording Mode.
or
(l 29)
*1
(l 59)
(l 49)
(l 60)
*1
(l 68)
31
VQT1Y31