Pre-Rec; Shooting Guide - Panasonic HDC-HS250P Operating Instructions Manual

PRE-REC

This prevents you from missing a
shot.
This allows recording of the pictures and sound
to start approximately 3 seconds before the
recording start/stop button is pressed.
1
Press the PRE-REC button.
PRE-REC
appears on the screen.
≥ Aim this unit at the subject and position it
securely.
2
Press the recording start/stop
button to start recording.
≥ There is no beep sound.
≥ After recording starts, the PRE-REC setting is
canceled.
≥ PRE-REC is canceled in the following cases.
jIf you change the mode.
jIf you open the SD card cover when the
[MEDIA SELECT] is set to [SD CARD] in
Recording mode.
jIf you press the MENU button.
jIf you turn the unit off.
≥ When the remaining time left for recording
motion pictures is less than 1 minute, PRE-
REC cannot be set.
≥ If you start recording less than 3 seconds after
pressing the PRE-REC button, or while the
PRE-REC indication flashes within about
3 seconds after initiating the Quick Start
operation, motion pictures taken 3 seconds
before pressing the recording start/stop button
cannot be recorded.
≥ When the recording start/stop button is
pressed, image shake and operation sound
may be recorded.
≥ Images displayed on the thumbnail in Playback
Mode will differ from the motion pictures
displayed at the start of playback.
PRE-REC

Shooting guide

Message is displayed when this unit is moved
rapidly.
Select the menu. (l 28)
[RECORD SETUP] # [SHOOTING GUIDE]
# [ON]
≥ This function's default setting is [ON].
When "CAMERA PANNING IS TOO FAST."
appears, move the unit slowly while recording.
≥ Set to [OFF] to turn off the message
indication.
≥ Message will not appear while pausing the
recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set
to [ON])
≥ In some recording conditions, messages may
not appear.
47
VQT1Y31