Cradlepoint ARC CBA850 Product Manual page 69

CBA850 | USER MANUAL Firmware version 5.4.0
CRADLEPOINT
Local Network Editor
Click Add or select a network and click Edit to open the Local Network Editor to make configure a LAN. The Local Network Editor
contains the following tabs:
• General Settings
• IPv4 Settings
• IPv6 Settings
• Interfaces
• Access Control
• IPv4 DHCP
• IPv6 Addressing
• Schedule
GENERAL SETTINGS
Enabled: Push to manually disable a network.
Also, some settings could cause a network to be
automatically disabled: click here to re-enable
the network.
Name: This primarily helps to identify this
network during other administration tasks.
Hostname: [Default: cp (for Cradlepoint)] The
hostname is the DNS name associated with the
router's local area network IP address.
NOTE: You can access the router's administration pages by typing the hostname into your browser, so if you change "cp" to another hostname, you can
access the administration pages through the new hostname.
© 2015 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 67