Serial Redirector - Cradlepoint ARC CBA850 Product Manual

CBA850 | USER MANUAL Firmware version 5.4.0
CRADLEPOINT

Serial Redirector

A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial device can also be
accessed by running "serial" from an SSH session.
Telnet to Serial Configuration
Enabled: Enabling Telnet to Serial will
start a Telnet server that passes its
connection to the serial adapter.
Enabling this service is not necessary
when accessing serial through SSH.
LAN: Enable serial redirector for LAN
connections.
Authenticated LAN: Enable serial
redirector for Authenticated LAN
connections. You must be logged into the router to use the redirector.
WAN: Enable serial redirector for WAN connections.
Server Port: Enter a port number for the redirector to use. (Default: 7218)
USB Serial Adapter Configuration
Baud Rate: Select from the dropdown list.
• 50
• 75
• 110
• 134
• 150
• 200
• 300
• 600
© 2015 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 134