Seiko I Infotech LP-1020 User Manual page 97

Menu name
Protocol
Menu
name
System
Downloaded From ManualsPrinter.com Manuals
(2) Protocol menu
For each parallel channel and port in the Protocol menu, select the PDL
numbers in "PDL SELECT" as listed below. When the Protocol menu is
changed, system reset is executed.
Port number : Protocol name
——PORT 1 :XPT
——PORT 2 : LPD
——PORT 3 : FTP
:
:
——PARALLEL
Note:
You can set the ports you use in Ethernet parameters in System menu (initial
parameter is 3 ports).
(3) System menu
Set the number of ports you use and the protocol types in System menu
listed below:
——COMM. PARAM. ——ETHERNET ——PORT SELECT
——PARALLEL ——TIMING MODE
——USB
Note:
FTP, XPT, and LDP comprehensively allow for 10 ports to be set.
Initial parameter is 1 port for each protocol. (XLF)
Setting example: # PORT SELECT 1-10
——PDL SELECT
——XPT PORT
——PDL SELECT
——PRINTER NAME
——PDL SELECT
——USER NAME
——PDL SELECT
:
:
——TIMEOUT (sec)
> F F F X X X L L L – ....... In case of 3 ports for each protocol
▼Setting menu
:
:
——XLF
(Refer to "Note" below.)
3-7