Seiko I Infotech LP-1020 User Manual page 47

Downloaded From ManualsPrinter.com Manuals
When a job is saved, the following message appears and the device stands
by for selection.
When a job is not saved, this message is omitted.
D E L E T E J O B ?
Y = E N T E R
Under normal conditions, the display reads "INITIALIZING STANDBY"
and is changed to the following message.
S Y S T E M V E R S I O N
0 1 A
The message is changed to the "WARMING UP".
W A R M I N G U P
The message indicates that the device is now online ("PRINT READY").
P R I N T R E A D Y
A "PRINT READY" message indicates that the device is functioning
normally.
▼Turning the power on and off
If a key input is not made,
this message will time-out
N = C A N C E L
after about 10 seconds
and the device starts up
with the job in saved
condition.
Warm up will take about 4
n n n
minutes. (about 8 minutes
with LP-1020L)
nnn: a count down for the
warm up is displayed.
2-5