■FTP DATA TYPE
■SNMP
■SNMP VERSION
■TRAP** (** : 01 - 02)
12-10
Downloaded From ManualsPrinter.com Manuals
Specifies the initial value of the data transfer type when receiving ftp data.
<Parameter (choice input method)>
ASCII/BIN/BIN
Specifies the SNMP operation. When the setting is ON, SNMP is enabled.
The SNMP community name can be specified using the Web name.
<Parameter (choice input method)>
ON/OFF
Specifies the SNMP version.
<Parameter (choice input method)>
V1/V2
●MANAGER
Specifies the manager IP address to return TRAP.
When the following TRAP conditions are OFF, TRAP does not occur in
this setting.
<Parameter (numerical input method)>
000.000.000.000 to 255.255.255.255
Default value: 000.000.000.000
(TRAP is the same when it is OFF if not registered.)
: Default value
: Default value
: Default value