Turning The Camera On; Selecting A Mode; Using The Screen Display - Panasonic DVC20 Operating Instructions Manual

DVC20_Eng.book 12 ページ ２００５年１０月３１日 月曜日 午前１０時３６分

Turning the camera on

When the camera is turned on with the lens cap fitted, the
automatic white balance adjustment may not function properly.
Please turn the camera on after removing the lens cap.
ª How to turn on the power
1
Set the [OFF/ON] switch to [ON].
≥The power lamp lights up.
ª
How to turn off the power
1
Set the [OFF/ON] switch to [OFF].
≥The power lamp goes off.

Selecting a mode

1
Set the mode switch to [CAMERA] or [VCR].
CAMERA
VCR
[CAMERA]: Tape recording mode
Use this when you record the image on a tape.
[VCR]: Tape playback mode
Use this to play back a tape.
12
Before using

Using the screen display

Press the [ENTER] button at the center of cursor buttons, and
icons will be displayed on the screen. Each press switches the
display as follows depending on the mode.
(In the Tape playback mode, the icons will be automatically
displayed on the screen.)
1) Tape recording mode
([AUTO/MANUAL/FOCUS] switch is set to [AUTO])
3
Tele-macro
4
Soft skin mode
2
Fade
1
Backlight compensation
3
Night view/0 Lux night view
4
Recording check
2) Tape recording mode
([AUTO/MANUAL/FOCUS] switch is set to [MANUAL])
4
White balance
Shutter speed
Iris or gain value
1
Select/Adjust
2
Select/Adjust
3) Tape playback mode
3
Playback/pause
4
Stop
2
Rewind (review playback)
1
Fast forward (cue playback)
OFF
-21-
-21-
-21-
-20-
-20-
-18-
OFF
-23-
-23-
-23-
OFF
-25-
-25-
-25-
-25-