Table of Contents
Advertisement
Removing the Card
Open the Card Slot Cover and then pull the Card
straight out.
≥After removing the Card, close the Card Slot
Cover.
ª [ACCESS] Lamp
(11)
ACCESS
While the Movie Camera is accessing the Card
(reading, recording, playback or erasing), the
[ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never attempt
to open the Card Slot Cover, to pull out the
Card, to turn off the Movie Camera. Such
actions will damage the Card, and recorded
data, and cause the Movie Camera to
malfunction.
≥It may take time to record pictures if you use
MultiMediaCard. (The [ACCESS] Lamp keeps
turning on. However, this is not a malfunction.)
Turning on the Movie Camera
When the Movie Camera is turned on with the
Lens Cap on, the Automatic White Balance
Adjustment may not function properly. Please
turn on the Movie Camera after removing the
Lens Cap.
ª How to Turn on the Power
1
Set the [OFF/ON] Switch
pressing the button 1.
≥The Power Lamp
(46)
(46)
ON
(48)
ª How to Turn off the Power
1
Set the [OFF/ON] Switch
pressing the button 1.
(48)
72
Before Use
(11)
(48)
to [ON] while
lights up.
1
(48)
to [OFF] while
ON
1
Selecting Modes
You can choose a desired mode by rotating the
Mode Dial.
1
Rotate the Mode Dial
(44)
: Tape Recording Mode
Use this mode when recording pictures on a tape.
Also, you can record still pictures on the card
simultaneously during recording on a tape.
: Tape Playback Mode
Use this mode when playing back the recorded
scene on a tape.
: Card Recording Mode
Use this mode when recording still picture on a
card.
: Picture Playback Mode
Use this mode when playing back the recorded
still picture on a card.
: PC Mode
Use this mode when you want to connect the
Movie Camera to your Personal Computer.
Using the Viewfinder/LCD Monitor
ª Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Tilt up the Viewfinder.
≥The Viewfinder can also be pulled out for use,
and the length of the pulling out is adjusted in
2 steps.
≥Do not pull on the Eyecup to extend the
Viewfinder.
2
Adjust by sliding the Eyepiece Corrector
Knob
(53)
.
(53)
(44)
.
12:30:45
12:30:45
12:30:45
15.10.2004
15.10.2004
15.10.2004
12:30:45
15.10.2004
Advertisement
Table of Contents
