Turning On The Movie Camera And Selecting Modes; Using The Viewfinder/Lcd Monitor - Panasonic NV-GS70B Operating Instructions Manual

ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1 on the cassette (by sliding it in the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it in the [REC] arrow
direction).
1
R E C
SAVE
≥For other notes concerning this item, see
Turning on the Movie Camera and
Selecting Modes
Turn on the power first and then select modes.
ª How to Turn on the Power
1
Set the [OFF/ON/MODE] Switch
while pressing the button 1.
≥The [CAMERA] Lamp
CAMERA
VCR
(47)
CARD PB
(49)
ª How to Switch Modes
2
Rotate the [OFF/ON/MODE] Switch
≥With each rotate, the Mode changes.
≥The appropriate Mode Lamp lights up.
(49)
ª How to Turn off the Power
3
Set the [OFF/ON/MODE] Switch
[OFF] while pressing the button 1.
(49)
-58-
(49)
to [ON]
(47)
lights up.
1
(49)
(49) to
1
Before Use

Using the Viewfinder/LCD Monitor

ª Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Tilt up the Viewfinder.
≥The Viewfinder can also be pulled out for use.
≥Do not pull on the Eyecup to extend the
.
Viewfinder.
2
Adjust by sliding the Eyepiece Corrector
Knob (56)
ª Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1
Press the [PUSH OPEN] Button
the LCD Monitor
direction of the arrow.
≥The Viewfinder goes off.
.
PUSH
OPEN
(2)
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
180o 1 from the vertical position to the
upward direction and a maximum of 90o 2 to
the downward direction. Forcefully rotating
the LCD Monitor beyond these ranges will
damage the Movie Camera.
-14-
.
(56)
12:30:45
12:30:45 12:30:45
15.10.2003 15.10.2003 15.10.2003
12:30:45
15.10.2003
(3)
out about 90o in the
(3)
1180o 290o
(2) and pull