Table of Contents
Advertisement
3
Close the Cassette Holder by pressing the
[PUSH] mark 1.
1
PUSH
4
Close the Cassette Compartment Cover.
ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1 on the cassette (by sliding it to the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it to the [REC] arrow
direction).
1
R E C
SAVE
≥For other notes concerning this item, see
Using a Card
A Card can be used to record pictures.
ª Caution before inserting/removing a
Card
Be sure to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function
properly or it may cause the loss of recorded
data in a Card.
ª Inserting a Card
1
Slide the [OPEN] Lever
(5)
Slot Cover
.
OPEN
(3)
2
While holding the Memory Card with its cut
corner facing right 1, insert it into the Card
(4)
Slot
.
Before Use
.
-98-
(3)
to open the Card
(5)
(4)
1
3
Close the Card Slot Cover
Removing the Card
Open the Card Slot Cover and press the centre of
the Card and then pull it straight out.
≥After removing the Card, close the Card Slot
Cover.
≥The Movie Camera may be damaged if the
Card is forced out when the Card is fully
inserted.
ª Card Access Lamp
While the Movie Camera is accessing the Card
(reading, recording, playback or erasing), Card
Access Lamp lights up.
≥While Card Access Lamp is on, never attempt
to open the Card Slot Cover, to pull out the
Card, to turn off the Movie Camera, or to turn
the Mode Dial. Such actions will damage the
Card, and recorded data, and cause the Movie
Camera to malfunction.
Turning on the Movie Camera
ª How to Turn on the Power
1
Set the [OFF/ON] Switch
pressing the button 1.
≥The [POWER] Lamp
(46)
(47)
ª How to Turn off the Power
1
Set the [OFF/ON] Switch
pressing the button 1.
(46)
Selecting Modes
You can choose a desired mode by rotating the
Mode Dial.
-63-
(5)
securely.
(17)
(17)
(46)
to [ON] while
(47)
lights up.
1
ON
(46)
to [OFF] while
ON
1
Advertisement
Chapters
Table of Contents
