Table of Contents
Advertisement
DVC20_Eng.book 32 ページ ２００５年１０月３１日 月曜日 午前１０時３６分
Others
Indications
Various functions and the camera-recorder status are shown on
the screen.
Basic indications
:
Remaining battery power
0h00m00s00f:
Time code
3:30:45PM:
Date/Time indication
Recording indications
R0:45:
Remaining tape time
≥Remaining tape time is indicated in minutes. (When it reaches
less than 3 minutes, the indication starts flashing.)
SP:
Standard Play mode
(Recording speed mode)
LP:
Long Play mode
(Recording speed mode)
¥:
Recording
; (Green):
Recording pause
; (Green flash):
Standby mode
; (Red):
Fade out
:
Recording check
:
Cinema mode
CINEMA
:
Digital zoom
:
Automatic mode
AUTO
:
Manual mode
MNL
MF:
Manual focus
5k:
Zoom magnification indication
:
Backlight mode
:
Image stabilizer
EIS
1/500:
Shutter speed
F2.4:
F number
6dB:
Gain value
:
Soft skin mode
:
Tele macro
:
Fade (White)
:
Fade (Black)
:
Color night view function
:
0 Lux night view function
0Lux
:
Zoom microphone
ZOOM
:
Microphone sensitivity level
:
Wind noise reduction
5:
Sports mode (Scene mode)
:
Portrait mode (Scene mode)
:
Low light mode (Scene mode)
:
Spotlight mode (Scene mode)
:
Surf & snow mode (Scene mode)
:
Auto white balance
AWB
:
Indoor mode (recording under
incandescent lamp)
:
Outdoor mode
:
White balance adjustment mode
Playback indications
¥:
Recording underway
1:
Playback
;:
Pause
-25-
5:
Fast-forward/Cue playback
6:
Rewind/Review playback
D
E
/
:
Slow motion playback
;1/2;:
Frame-by-frame playback
2k5:
Variable-speed search
:
Repeat playback
A.DUB ¥:
Audio dubbing
A.DUB ;:
Audio dubbing pause
:
Blank search
12bit, 16bit:
Audio recording mode
:
Volume adjustment
32
-18-
-18-
-18-
-18-
-18-
-22-
-19-
-17-
-22-, -23-, -24-
-24-
-19-
-20-
-22-
-24-
-24-
-24-
-21-
-21-
-21-
-21-
-20-
-20-
-19-
-19-
-21-
-22-
-22-
-22-
-22-
-22-
-23-
-23-
-23-
-23-
-25-
-25-
-25-
-25-
-25-
-26-
-25-
-29-
-29-
-18-
-31-
-25-
Others
Warning/alarm indications
If any one of the following indications lights up or flashes,
please check the camera-recorder.
Confirmatory indications
Y: A cassette with the accidental erasure prevention slider
placed in the [SAVE] position is inserted.
No cassette is inserted.
[--]/0:
The built-in battery is low.
°: The warning/alarm indication appears when you record
yourself. Turn the LCD monitor towards the viewfinder
and check the warning/alarm indication.
REMOTE:
An incorrect remote control mode has been selected.
2END:
The tape came to the end during recording.
::
The video heads are dirty.
Textual indications
3DEW DETECT/3EJECT TAPE:
Condensation has occurred. Take out the cassette and
wait for a while. It takes some time until the cassette
holder opens, but this is not a malfunction.
LOW BATTERY:
The battery is low. Recharge it.
NO TAPE:
No tape is inserted.
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a tape with the
accidental erasure prevention slider placed in the [SAVE]
position.
You are attempting audio dubbing or digital dubbing on a
tape with the accidental erasure prevention slider placed
in the [SAVE] position.
CHECK REMOTE MODE:
An incorrect remote control mode has been selected. This
is only displayed at the first operation of the remote
control after powering-on.
WRONG TAPE FORMAT:
You are attempting to play back a tape section that has
been recorded with a different TV system. This cassette is
incompatible.
UNABLE TO A.DUB (LP RECORDED):
Audio dubbing cannot be performed because the original
recording was in LP mode.
UNABLE TO A.DUB:
You are attempting to perform audio dubbing on a
non-recorded tape.
COPY PROTECTED:
Images cannot be recorded correctly because the
medium is protected by a copy guard.
NEED HEAD CLEANING:
The video heads are dirty.
PUSH THE RESET SWITCH:
An irregularity in the equipment has been detected. Press
the reset button (
). This may solve the problem.
-7-
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/MANUAL/FOCUS]
switch is set to [AUTO].
REVERSE THE LCD MONITOR:
At the time of 0 Lux night view mode, when LCD monitor
is not reversed, it displays. When the LCD monitor is
rotated by 180° towards the lens, the brightness of the
LCD monitor cannot be adjusted.
-14-
-35-
-35-
-9-
-11-
-16-
-35-
-16-
Advertisement
Table of Contents
