Edit Mode; Copying Onto A Dvd Recorder Or A Vcr (Dubbing) - Panasonic DVC20 Operating Instructions Manual

DVC20_Eng.book 27 ページ ２００５年１０月３１日 月曜日 午前１０時３６分

Edit mode

Copying onto a DVD recorder or a VCR
(Dubbing)
Pictures recorded by the camera-recorder can be stored on a
DVD-RAM or other such media. Refer to the instructions for the
recorder.
≥Place a recorded cassette in the camera-recorder, and an
unrecorded DVD-RAM or cassette in the DVD recorder or
VCR.
1
Connect the camera-recorder and the recorder.
Connecting with the AV cable
[S-VIDEO IN]
≥Connect the camera-recorder and the recorder by using the
AV cable 1.
≥If the recorder has an S-Video terminal, then also connect
an S-Video cable 2. It allows you to copy clearer image.
Connecting with the optional DV cable (Only for equipment
with a DV terminal)
DV
2
Turn on the camera-recorder and set to Tape Playback
Mode.
3
Select the input channel on the TV set and recorder.
4
Press the [3] button to select the [1/;] icon to start
playback.
≥The image and sound are reproduced.
5
Start recording. (Recorder)
6
Press the [4] button to select the [∫] icon to stop
playback.
7
Stop recording. (Recorder)
Edit mode
[AUDIO IN]
[VIDEO IN]
2 1
AUDIO
L– –R
DV S-VIDEO OUT VIDEO OUT
OUT
S /
2
(L2) (L2)
≥For more information, refer to the operating instructions for
your TV set and recorder.
≥When you do not need functional indications or date and time
indications, press the [OSD] button on the remote control for
no indication. (When you connect the camera-recorder and a
recorder with the DV cable, these indications may not
appear.)
ª
When neither image nor sound from the camera-
recorder is output to the TV set
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
27