Agilent Technologies E3633A Operating Manual page 23

Chapter 1 General Information
Input Power Requirements
Remove the power cord. Remove the
1
fuse-holder assembly with a flat-blade
screwdriver from the rear panel.
Rotate the power-line voltage selector
3
until the correct voltage appears.
100, 115, or 230 Vac
Install the correct line fuse. Remove
2
the power-line voltage selector from the
power-line module.
100 or 115 Vac, 6.3 AT fuse
230 Vac, 3.15 AT fuse
Replace the power-line voltage selector
4
and the fuse-holder assembly in the rear
panel.
1
11