Sharp AL-1640 Service Manual page 7

Item
Position
Size
Angle
Set
Text
content of
water
mark
Edit Fonts
Edit Density
Transparent Text
On First Page Only Yes, No
As Outline Only
(4) Dispaly
a. LCD message
Status LCD display
AUTO
Online Online
PCL
HEX
Data Loss
Press ENTER
Error
Memory Full Press ENTER
Tray 1 <Paper Size>
Tray 2 <Paper Size>
Bypass <Paper Size>
Out of paper
Error
Tray <Paper Size>
Check Panel
Clear Paper
Path
Copies
Resolution
Smoothing
User
Main Menu
Toner Save
setting
Paper Source
Paper Size
Orientation
Emulation
PCL6 PCL5e
Depends on the paper size.
MAX Short –5.84" ∼ 5.84"
Long –8.5" ∼ 8.5"
6 ∼ 900
±90˚
TOP SECRET
CONFIDENTIAL
DRAFT
ORIGINAL
COPY
Refer to the following Font List.
0 ∼ 255
Yes, No
Yes, No (Only when Transparent
Text is OFF.)
Content
Auto select to
emulation
PCL
HEX
When the paper feed
tray is selected to
other than AUTO.
When the paper feed
tray is selected to
AUTO.
Toner empty
Drum replacement
Cover open
Service call error
Paper jam
Paper exit tray full
Printing of the set
quantity is made.
Printing at the set
resolution is made.
Smoothing function
setting.
Toner save mode
setting
Tray select
Paper size select
Setting of print
direction
Emulation setting
Status LCD display
Interface
I/O Time Out
Menu
User
setting
Configuration Page
Test Printing
Menu
PCL Font Page
b. LED display
Extinguished
ON LINE light
Lit
Extinguished
Lit
DATA light
Blinking
c. Operation keys
Changes between the on-line and off-line modes.
When the printer is on-line, it can receive data
from the computer with which it is connected.
LINE key When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings if
the "Data Remaining" message is displayed.
Used to show setting menus on the display in
MENU key
sequence.∗
Used to show the setting items of the selected
ITEM key
menu in sequence.∗
Left arrow key
Used to change the value of any item.∗
Right arrow key
ENTER key Used to enter a new value.
∗ Invalid when the printer is on-line.
(5) PC environment
Computer IBM PC/AT or compatible computer equipped with a
Type bi-directional parallel interface and CD-ROM drive
Operating Windows 3.1, Windows 95, Windows 98, Windows
System NT4.0
Windows 95/3.1 : 486SX or better
Windows 98 : 486DX/66MHz or better (Pentium or
CPU
better is recommended.)
Windows NT4.0 : 486/25MHz or better
Windows 95/3.1 : 8MB or more (12MB or more is
recommended.)
RAM Windows 98 : 16MB or more (32MB or more is
recommended.)
Windows NT4.0 : 16MB or more
3 – 4
AL-1670
Content
If data reception is
not completed within
the set time, it is
judged as a time out
error.
Configuration page is
printed.
PCL6 Font page is
printed.
Indicates that the printer is off-line
and data cannot be transferred or
printed. Make settings from the
operation panel in this mode. Note,
however, that you cannot make
settings if the "Data Remaining"
message is displayed.
Indicates that the printer is on-line
and data can be transferred and
printed.
Indicates that there is no data
being received or processed.
Indicates that the printer is
receiving or processing print data.
Indicates that there is print data
remaining in memory that has not
yet been printed.