Printing A Test Page And Checking The Colours; Printing A Test Page - Sharp AR-C260 Color Management Manual

Printing a Test Page and Checking the Colours

Printing a Test Page

Follow these steps to print a test page from the operation panel.
1
Enter the key operator programs.
To enter the key operator programs, see "Using
the key operator programs" on page 3 of the Key
Operator's Guide.
2
Touch the [PRINTER SETTINGS] key.
3
Touch the [COLOUR ADJUSTMENTS] key.
INTERFACE SETTINGS
COLOUR ADJUSTMENTS
RE
Test Page (printed by printer)
Low Density
C M
Low Density
The top line of the test page shows the four colours (cyan, magenta, yellow, and black) at low density, mid den-
sity, and high density. The bottom line shows processed grey* at low density, mid density, and high density.
*Processed grey is the colour obtained when the cyan, magenta, and yellow colours on the top line are com-
bined together.
OK
Mid Density
Y Bk C M Y
Mid Density
4
Touch the [TEST PRINT] key.
COLOUR DJUSTMENTS
EASY CALIBRATION
TEST PRINT
5
Load A4 or letter-size paper in the tray and
touch the [EXECUTE] key.
When the [EXECUTE] key is touched, "SELF
PRINT IN PROGRESS" appears in the display.
After a brief interval, a colour test page will be
printed (see below).
High Density
Bk C M Y Bk
High Density
3