Panasonic HC-W580 Operating Instructions Manual page 245

∫ Using Cyclic Mode
In this mode, the Remote Pan Tilt Cradle cycles through positions registered to the position buttons
in the desired sequence.
The default sequence is as follows: [HOME] # [POS1] # [POS2] # [POS3] # [POS4] # [POS5]
Touch .
≥ The Remote Pan Tilt Cradle moves to the next position at approximately 5 second intervals.
≥ If you touch [Stop] while the Remote Pan Tilt Cradle is moving, it will stop midway. Cyclic Mode
will be deactivated.
≥ If you touch [Pause] and touch another position button, Cyclic Mode will be deactivated. The
Remote Pan Tilt Cradle will move to the position of the position button you have touched.
≥ In Cyclic Mode, turns of the position buttons without a registered position will be skipped. The
Remote Pan Tilt Cradle will move to the position of the next position button.
Rearranging the Cyclic Mode sequence
1 Touch .
2 Touch .
3 Touch the desired turn.
≥ If you touch [Reset], the sequence will return to the default setting.
4 Touch the desired position button.
≥ If you touch [SKIP], the Remote Pan Tilt Cradle will skip to the position of the next turn in Cyclic
Mode.
5 Touch [ENTER].
∫ Deleting positions registered to the position buttons
1 Touch .
2 Touch .
3 Touch the position button you want to delete.
≥ To delete all positions registered to the position buttons, touch [Delete all].
4 Touch [YES].
≥ When this unit is connected to the Remote Pan Tilt Cradle, this unit is set to Motion Picture
Recording Mode. You cannot switch this unit to Still Picture Recording Mode.
≥ We recommend that you make a test recording in advance to check if the image and sound are
recorded correctly.
≥ The sound of the Remote Pan Tilt Cradle in operation will be recorded.
≥ If you start recording after making changes to the setup of the Remote Pan Tilt Cradle, such as
switching the Remote Pan Tilt Cradle Mode or changing the location of the Remote Pan Tilt
Cradle, it may rotate and return to its home position.
≥ Once the operation starts, do not disconnect the USB cable or move the Remote Pan Tilt Cradle
and this unit until the operation is finished. This may cause a malfunction or the motion picture not
to be recorded correctly.
≥ When you press the power button or when [ECONOMY (BATT)]
(l 35) works, this unit and the Remote Pan Tilt Cradle will turn off after the Remote Pan Tilt
Cradle rotates and returns to its home position.
≥ When the Remote Pan Tilt Cradle is in operation, neither [ECONOMY (BATT)] nor [ECONOMY
(AC)] will work.
- 245 -
(l 35) or [ECONOMY (AC)]