Panasonic HC-W580 Operating Instructions Manual page 227

Problem
Remaining battery
indication is not displayed
properly.
Problem
The unit arbitrarily stops
recording.
Auto Focus function does
not work.
Colour balance of images
is strange when recording
in a place such as a
gymnasium.
Colour or brightness of
the image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Indication
≥ The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not displayed
correctly, fully charge the battery, discharge it and then
charge it again.
Recording
≥ Use an SD card that can be used for motion picture recording.
(l 14)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card or built-in
memory. (l 39)
≥ If [AGS] is [ON], record in the normal horizontal position or set
[AGS] to [OFF]. (l
≥ Switch to Intelligent Auto Mode or Intelligent Auto Plus Mode.
≥ If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l
≥ In a place with multiple light sources, such as a gymnasium or
a hall, set the White Balance setting to
If you cannot record clearly with the
it to (Manual adjustment mode).
≥ Colour or brightness of the image may change, or you may
see horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ In Motion Picture Recording Mode, record in Intelligent Auto
Mode/Intelligent Auto Plus Mode or set the shutter speed to
1/100 in areas where the power supply frequency is 50 Hz, or
1/125 in areas of 60 Hz.
≥ In Still Picture Recording Mode, this will not affect the
recorded image.
- 227 -
Check points
Check points
82)
55, 66)
(l
(Indoor mode 2).
(Indoor mode 2), set
64)