Searching For Wireless Access Points To Set Up A Connection - Panasonic HC-W580 Operating Instructions Manual

Enter a PIN code to set the Wi-Fi connection
1 Touch [PIN code] in Step 6.
2 Touch the wireless access point to be connected.
≥ If you touch [Refresh], you can search for wireless access points again.
≥ If you touch
touch [OK].
3 Enter the PIN code displayed on this unit screen into the wireless access
point.
≥ For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
4 Touch [NEXT].
≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set Wireless
Access Point].
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j

Searching for wireless access points to set up a connection

≥ Confirm Encryption key (Password) of the selected wireless access point if the network
authentication is encrypted.
1
Press Wi-Fi button on this unit.
2
Touch [Wi-Fi Setup].
3
Touch [Set Wireless Access Point].
4
Touch the part with no display of a wireless
access point C.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 179.
5
Touch [Search].
and select a wireless access point, all characters will be displayed. In this case,
- 171 -
  
A [Delete]
B [EXIT]
