Panasonic HC-W580 Operating Instructions Manual page 181

[Wi-Fi Password]
This will set/clear the Password to limit the startup of the Wi-Fi setting menu.
By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi
function by third party, and protect the set personal information.
1 Touch [Setup].
2 Touch [INPUT], and enter the Password (6 characters).
≥ After finish entering the Password, touch [Enter].
≥ If the Password has already been set,
≥ For details on how to enter characters, refer to page 97.
3 Touch [NEXT].
4 Touch [INPUT], and enter the same Password again.
≥ After finish entering the Password, touch [Enter].
≥ If the Passwords match with each other, a message is displayed.
5 Touch [EXIT].
≥ If you set the Wi-Fi Password, you will need to enter the Password each time you touch [Wi-Fi
Setup] on the Wi-Fi home screen.
≥ When you forget your Wi-Fi Password, perform [Reset Wi-Fi Settings] from the Setup menu. This
will set the Wi-Fi setting to the condition at the time of purchase, and you will be able to use the
Wi-Fi setting menu.
[Reset Wi-Fi Settings]
You can change the Wi-Fi setting back to the default condition.
≥ The "LUMIX CLUB" Login ID and Wi-Fi Password are also deleted.
≥ Information on wireless access points, smartphones, and Wireless Sub Cameras registered to
this unit is also deleted.
[Device Name]
You can view and change this unit's Device name (SSID), which is used for operating this unit as a
wireless access point.
1 Touch [INPUT], and enter the desired Device name (SSID).
≥ Input up to 20 characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used.
≥ For details on how to enter characters, refer to page 97.
≥ Touch [Enter].
2 Touch [EXIT].
≥ If you are going to connect directly to a smartphone after changing the Device name (SSID), set
the connection again with the changed Device name (SSID).
≥ The Password entered during the setting of direct connection cannot be changed.
193)
[Setup]/[Delete]
(l 38)
is displayed.
(l
- 181 -
(l 142, 175, 190, 193)
142, 175, 190, 193)
(l 175, 190,