Table of Contents
Advertisement
FIT THE SIDE BURNER AND HOSE ASSEMBLY (It's best to do this with another person to help)
8
(a) Unscrew and remove two front screws and washers holding side burner in place. Note: Do not loosen
electrode screw.
(b) Loosen side burner in side shelf.
(c) Remove knob and bezel from side burner control valve. To remove, pull knob straight out from valve stem.
Unscrew bezel from valve face and set the two screws aside.
(d) Insert valve stem through hole in fascia.
(e) Place side burner tube over the valve, making sure that valve is inside side burner tube.
(f) Attach bezel to fascia and valve face with previously removed 2 screws.
(a)
(c)
(e)
(b)
(d)
(f)
15
Advertisement
Table of Contents
