Table of Contents
Advertisement
Front Doors
Stand cart upright.
Align door bracket holes with holes on front legs. Attach door bracket to left and right panel assemblies
with (4) M4x10 screws. Note: Attach bracket so that magnets are at bottom.
Remove the screws and washers pre-assembled to the door handle ends, and use them to attach handles
to doors.
Insert the lower door pin into the hole on the bottom shelf. Push down the upper door pin, align it beneath
hole in door bracket, and release pin so that it inserts in hole.
Repeat this for the other door.
Note: If the doors do not line up when closed or cannot close freely, loosen the screws on the door pin
bracket. Adjust the door pin bracket as necessary, and retighten screws. Recheck door alignment once grill
is completely assembled and readjust if necessary.
M4x10 screw 4 pcs
10
Advertisement
Table of Contents
