Table of Contents
Advertisement
Grill Head to Cart
This step requires two people to lift and position grill head onto cart.
Remove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter wires out to
side of grill head.
Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wires are hanging
outside the cart. Open lid and attach head to cart with (4) M6x13 screws and M6 compression washers.
M6x13 screw
4
M6 compression washers 4 pcs
12
Advertisement
Table of Contents
