Eis; Conventional Video Recording - Zerotech DOBBY User Manual

EIS

EIS (Electronic Image Stabilization) can deblur the images of a video, eliminating jitter, jelly, etc. It applies
to both the conventional video recording and the 10s auto-track short video recording. We suggest you
enable it.
How to enable EIS: Tap the
"EIS". Please refer to "Camera Settings" on page 17. EIS needs to be enabled once again each time you
open the app.
How to disable EIS: When the temperature of the aircraft reaches 70° C or you quit the app, EIS will
automatically be disabled.

Conventional Video Recording

"Photo/Video Switch" to go to the conventional video recording interface.
Tap the
"Record" button to start recording. Tap the
Tap the
side of the interface to end your recording.
Conventional video recording can last as long as you want. The duraton will be displayed at the bottom of
the interface.
The conventional video recording interface is as follows:
During the conventional video recording, you can use the motion sensing method, the swipe
screen method, the free sticks method or the safe sticks method to control the flight.
ZEROTECH (Beijing) Intelligence Technology Co., Ltd.
"Camera Settings" button, select any of the lens angles in "Settings" -
"Stop Recording" button on the right hand
33