Takeoff/Landing; Flight Control; Motion Sensing Method - Zerotech DOBBY User Manual


When you touch DOBBY with your hand or other objects, like when using the palm
takeoff/landing function, take care not to touch the propeller.

Take extra care not to run into people or objects during indoor flight.

Takeoff/Landing

Takeoff
Tap it, the app will pop up the "Ground Takeoff" and "Palm Takeoff" options.
If you choose "Ground Takeoff", DOBBY will directly take off.
If you want to try palm takeoff, please first place DOBBY on your palm/tray, and then choose "Palm
Takeoff". The propellers will start to rotate. Wait until they fully rotate, remove your palm/tray or slightly toss
it.
After takeoff, the button will switch to
Landing
Tap it, the app will pop up the "Ground Landing" and "Palm Landing" options.
If you choose "Ground Landing", it will directly start to descend.
If you choose "Palm Landing", it will start to descend slowly. Place your palm/tray right under it. It will land
onto your palm/tray. Or it will close palm landing and restore to ground landing in 10 seconds.
After landing, the button will switch to

Flight Control


During your first flight, please begin with operating on a small scale. Pay attention to the
flight direction and adjust the flight speed, slowly working towards moderate-scale
operation.
Please don't operate on too large scale, so as to avoid accidental collision.


Motion Sensing Method

Using your mobile device's gravity sensor system, you can control flight by tilting your mobile device.
The left side of the screen is the swipe zone which controls ascent/descent and direction; the right side is
the motion zone which controls flying forward/backward/left/right, as in the picture below:
ZEROTECH (Beijing) Intelligence Technology Co., Ltd.
"Landing".
"Takeoff".
27