Safe Sticks Method; Taking Photos/Video Recording; Taking Photos - Zerotech DOBBY User Manual

The default control method is set to "Motion Sensing". You can switch it to "Free sticks"

in "App Settings" - "Control Method".
You can choose between "American Operator" and "Japanese Operator" in "App

Settings" - "Control Method" after choosing "Free sticks". It's right-hand throttle in the
Japanese Operator mode.
App is set to "Selfie" by default. You can switch it to "Find a View" in "App Settings" -

"Camera Orientation". Please refer to "Camera Orientation" on page 18 for its meaning
and applicable usage.

Actually, you don't have to stick to the position of the sticks drawn on the screen. Hold
down on any part of the left side of the screen, and the left stick will follow to the point
where you hold down; so it is for the right stick

Safe Sticks Method

Just like the remote controller too, the safe sticks method allows you to control DOBBY's flight by tapping
on the arrows on the four directions in the virtual sticks.
The operations of the safe sticks method are similar to the free sticks method. However, it uses tapping on
the arrows on the four directions instead of toggling. For the details, please refer to "Free Sticks Method"
on page 30.

Taking Photos/Video Recording

Taking Photos

Single shot: In the single shot mode, every time you tap the
Burst shot: In the burst shot mode, every time you tap the
burst shot photos.
You can take photos using the volume buttons on your mobile device or earphones. It is the same method
"Shutter" button.
as using the

The default mode is set to single shot. You can tap the
to switch between the single shot mode and the burst shot mode, and select how many
photos to take (3 photos by default) in the "Modes" menu. Please refer to "Camera
Settings" on page 17.

The photo timer is closed by default. You can tap the
activate the photo timer and select the countdown. Please refer to "Photo Timer" on
page 17.
ZEROTECH (Beijing) Intelligence Technology Co., Ltd.
"Shutter" button, it will take one photo.
"Shutter" button, it will take a series of
"Camera Settings" button
"Photo Timer" button to
32