Connecting The Aircraft To Do.fun - Zerotech DOBBY User Manual


If the battery level gets too low or a major failure occurs, DOBBY will immediately initiate
landing.

If both the GPS and the optic flow and ultrasonic positioning systems are not working,
DOBBY will start to hover until the positioning status returns to normal or user lands it.
But if the battery level gets too low while hovering, DOBBY will initiate landing.

If the Wi-Fi connection is lost or the app drops out, DOBBY will return and land if the
GPS positioning is being used, or initiate landing if the optic flow and ultrasonic
positioning is being used.

When the app is minimized or you get a phone call, DOBBY will start to hover until you
are back to the app. But if the battery level gets too low while hovering, DOBBY will
initiate landing.

When DOBBY tilts beyond 45° , it will automatically stop the motor as a safety precaution
(excluding during somersault).

Connecting the Aircraft to Do.Fun

Connect your mobile device to the aircraft's Wi-Fi. The default SSID is Dobby-XXXXXX. Please check the
label beside the battery compartment on the base of the aircraft to acquire the SSID. The default
password is zerotech. And you can change them in "App Settings".
Open the main interface of Do.Fun. First, toggle the "Indoor/Outdoor Switch" to choose your current
environment:
indicates indoor, it will use optic flow positioning.
indicates outdoor, it will use GPS positioning.
At last, check if it shows that it's connected to the Wi-Fi
and that the optic flow positioning status is normal
it's ready to fly, and you can take off.
Please manually adjust the Camera's pitch angle depending on your need before flight. Refer
to "Camera" on page 12.

When flying, keep DOBBY in your line of sight. Please ensure you keep DOBBY a good
distance away from people.
ZEROTECH (Beijing) Intelligence Technology Co., Ltd.
, that the aircraft's battery level is high
or the GPS positioning status is normal
,
. If so,
26