Charging The Battery; Dry Pick Up - Black & Decker BDH7200CHV Instruction Manual

Wall Mounting - Figure A
The product can be attached to a wall to provide a convenient
storage and charging point for the appliance. When mounting
to a wall, make sure the mounting method is suitable for the
wall type and is appropriate to the weight of the appliance.
Fix the mounting bracket to the wall using appropriate screws
and plugs for the type of wall, and weight of the appliance.
base over the hooks in the wall mount charging bracket.
Assembly Accessories - Figure B
accessories:
Fitting
Insert the appropriate accessory into the front of the
appliance as show in Figure B.
Make sure the accessory is fully pushed in.

Charging the battery

WARNING:
needed to avoid damage to your appliance.
Make sure the appliance is switched off. The battery will not be charged when the on/
While charging, the charger may become warm. This is normal and does not indicate a
WARNING:
Switching on and off - Figure C

Dry pick up

For everyday spills of dry material.
chute.
Optimizing the suction force
2
4
A
B
2
C
2