Black & Decker BDH7200M, BDH7200CHV, BDH9600CHV, BDH1000CHV Manual
Symbols
- The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V | volts |
Hz | hertz |
min | minutes |
or DC | direct current |
| Class I Construction (grounded) |
| Class II Construction (double insulated) |
A | amperes |
W | watts |
or AC | alternating current |
n0 | no load speed |
| earthing terminal |
| safety alert symbol |
.../min or rpm | revolutions or reciprocation per minute |
FUCTIONAL DESCRIPTION
- On/off switch
- Bowl release button
- Dust bowl
- Charger
- Charging bracket
- Dry pick up cloth filter
- Pre-filter
BDh7200M / BDh9600Chv Only
- Brush tool
- Crevice tool
Wall Mounting
Figure A
The product can be attached to a wall to provide a convenient storage and charging point for the appliance. When mounting to a wall, make sure the mounting method is suitable for the wall type and is appropriate to the weight of the appliance.
- Mark the location of the charger (5) screw holes on the wall (within reach of an electrical outlet for charging the vacuum while it is on the wall bracket).
- Fix the mounting bracket to the wall using appropriate screws and plugs for the type of wall, and weight of the appliance.
- Hang the appliance by placing the opening of the vacuum base over the hooks in the wall mount charging bracket.
Assembly Accessories
Figure B
Model BDH7200M / BDH9600CHV is supplied with some of the following accessories:
- A brush tool (8) for furniture and stairs.
- A crevice tool (9) for confined spaces.
Fitting
- Insert the appropriate accessory into the front of the appliance as show in Figure B.
- Make sure the accessory is fully pushed in.
Charging the battery
- Before first use, the battery must be charged for at least 10 hours.
- Place the appliance on the charging bracket whenever it is not in use.
Before charging, be sure to empty all contents and dry thoroughly if needed to avoid damage to your appliance.
- Make sure the appliance is switched off. The battery will not be charged when the on/ off switch (1) is in the on position.
- Place the appliance on the charging bracket (5).
- Plug in the charger.
- Leave the appliance to charge for at least 9 hours.
While charging, the charger may become warm. This is normal and does not indicate a problem. The appliance can be left connected to the charger indefinitely.
Do not charge the battery at ambient temperatures below 50°F or above 104°F.
Switching on and off
Figure C
- To switch the appliance on, slide the on/off switch (1) forward to position 1.
- To switch the appliance off, slide the on/off switch (1) back to position 0.
Dry pick up
- For everyday spills of dry material.
- Do not fill the dust bowl (3) beyond the end of the intake chute.
Optimizing the suction force
In order to keep the suction force optimised, the filters must be cleared regularly during use.
Emptying and cleaning the product
Removing the dust bowl and filters
(Figures D & E)
The filters are reusable and should be cleaned regularly.
- Press the bowl release button (2) and pull the dust bowl (3) straight off as shown in Figure D.
Figure D - While holding the dust bowl over a bin or sink, pull out the filter to empty the contents as shown in Figure E.
Figure E - To replace the dust bowl, push it back onto the handle until it clicks firmly into place.
Never use the appliance without the filters.
Optimum dust collection will only be achieved with clean filters.
Pre-filter
Figure F
The filter and pre-filter must be separated to clean fine debris from the filter. Dirt between the filter and pre-filter must be cleaned out regularly for optimum performance.
- Twist the pre-filter (7) counterclockwise and lift the filter (6).
Cleaning the dust bowls and filters
- The dust bowls and filters can be washed in warm soapy water.
- Make sure the filters and the dust bowl are dry before re-fitting.
Replacing the filters
The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters (catalog number EVF100) are available from your Black & Decker dealer.
MAINTENANCE
Use only mild soap and damp cloth to clean the vac. Never let any liquid get inside the vac; never immerse any part of the vac into a liquid.
Make sure the vacuum is completely dry before using it.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
Accessories
Recommended accessories for use with your appliance are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.
The use of any accessory not recommended for use with this appliance could be hazardous.
All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, call: 1-800-544-6986 or visit www.blackanddecker.com
IMPORTANT SAFETY INSTRUCTIONS
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially haz ard ous situation which, if not avoided, may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
When using an electrical appliances, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
Some household dust contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm such as asbestos and lead in lead based paint.
To reduce the risk of fire, electrical shock or injury:
To reduce the risk of electric shock – Do not use outdoors or on wet surfaces. - Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer's recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle charger, including charger plug, and charger terminals with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without dust bag and/or filters in place.
- Do not charge the unit outdoors.
- Use only the charger supplied by the manufacturer to recharge.
- Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.
- This appliance is intended for household use only and not for commercial or industrial use.
- Shock Hazard. To protect against risk of electrical shock, do not put unit or charging base in water or other liquid.
- Do not allow the cord to hang over the edge of a table or counter or touch hot surfaces. The unit should be placed or mounted away from sinks and hot surfaces.
- Plug the charger directly into an electrical outlet.
- Use the charger only in a standard electrical outlet (120V/60Hz).
- Unplug the charger from outlet before any routine cleaning or maintenance.
- This product includes rechargeable nickel cadmium batteries. Do not incinerate batteries as they will explode at high temperatures.
- Leaks from battery cells can occur under extreme conditions. If the liquid, which is a 20-35% solution of potassium hydroxide, gets on the skin
- wash quickly with soap and water or
- neutralize with a mild acid such as lemon juice or vinegar. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.
- Do not look into the air vents when the unit is switched on, as sometimes there is a possibility of small debris being discharged from the air vents, especially after cleaning / replacement of the filters as debris inside the unit can be disturbed.
SAVE THESE INSTRUCTIONS
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Black & Decker BDH7200M, BDH7200CHV, BDH9600CHV, BDH1000CHV Manual
Need Assistance?
Do you have a question about the BDH7200M that isn't answered in the manual? Leave your question here.