Panasonic KX-TG643 Operating Instructions Manual page 49

Problem
I cannot operate the
answering system.
I cannot operate the
answering system
remotely.
While recording a greeting
message or listening to
messages, the unit rings
and the operation stops.
Liquid damage
Problem
Liquid or other form of
moisture has entered the
handset/base unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L Someone is using the unit. Wait for the other user
to finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move
closer.
L You are entering the wrong remote access code. If
you forgot the remote access code, store a new
remote access code (page 34).
L Press each key firmly.
L The answering system is turned off. Turn it on
(page 35).
L You are using a rotary/pulse telephone. Try again
using a touch-tone phone.
L A call is being received. Answer the call and try
again later.
Cause/solution
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Useful Information
49