Registering A Unit - Panasonic KX-TG643 Operating Instructions Manual

Dect 6.0 expandable digital cordless answering system with 2/3/4/5 handsets
Table of Contents

Advertisement

Block calls without phone number
You can reject a call without phone
number including "Out of area",
"Private caller", or "Long
distance".
1
{MENU} i {#}{2}{4}{0}
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Viewing/editing/erasing call block
numbers
1
{MENU} i {#}{2}{1}{7}
2
{V}/{^}: Select the desired entry.
L To exit, press {OFF}.
3
Proceed with the desired operation.
■ Editing a number:
{EDIT} i Edit the phone
number. i {SAVE} i {OFF}
■ Erasing a number:
{ERASE} i {V}/{^}: "Yes"
i {SELECT} i {OFF}
Note:
L When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, {w/o NUM} appears if
the block calls without phone number
feature is turned on. To turn the
feature off: {w/o NUM} i {V} i
{SAVE} i {OFF}

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 5 for information on the
available model.
For assistance, please visit http://www.panasonic.com/help
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1
Handset:
{MENU} i {#}{1}{3}{0}
2
Base unit:
Press and hold {LOCATOR} for
about 4 seconds until the
registration tone sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
3
Handset:
Press {OK}, then wait until a long
beep sounds.
4
{OFF}
Note:
L While registering, "Base
regtr'ing" (Base registering) is
displayed on all registered handsets.
L When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1
{MENU} i {#}{1}{3}{1}
2
{3}{3}{5} i {OK}
3
Select the handset you want to
cancel by pressing the desired
handset number.
4
{V}/{^}: "Yes" i {SELECT}
Programming
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents